Installation Manual
EN
20
•  Finish off by mounting the central profile cover onto the 
central profiles, by pushing it until a click is heard [ 5 ].
5
•  Once completed, push the units into their final position 
[ 6 ].
•  If the units are to be installed inside a niche or within an 
enclosed structure, it is necessary to accommodate air 
flow at the back of the niche to assure proper ventilation 
at the back of the unit of about 20mm. Always mount 
front panels on door and drawer before pushing the unit 
into its final position inside the niche or structure.
•  Check the levelling of the appliance, adjusting its feet 
and wheels to correct it.
•  Secure the appliance to the adjacent cabinets by fixing 
to these the side profiles trims factory-installed on the 
appliance [ 7 ]. To make this operation easier keep the 
door and the drawer open.
6
•  Mount the covering frames onto the profiles, first insert 
them laterally and then push firmly until a “click” is heard 
[ 8 ].
7
8
WARNING
Take care as appliances will be front-heavy and may tip 
before they are secured to the adjacent furniture.










