User Manual
Table Of Contents
- FUJITSU LIFEBOOK U7312 | U7412 | U7512
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the notebook
- Status indicators
- Switching on the notebook
- Switching off the notebook
- Keyboard
- Touchpad and touchpad buttons
- Touchscreen/LCD screen without touch function (device-dependent)
- WebCam and Infrared Camera
- ePrivacy Filter (optional)
- Rechargeable battery
- Using the power-management features
- Memory cards
- Loudspeakers and microphones
- SIM card (configuration dependent)
- Wireless components: wireless LAN / Bluetooth / LTE / 5G (optional)
- Ethernet and LAN
- Your Port Replicator
- Security functions
- Connecting external devices
- Removing and installing components during servicing
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating the BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Erase Disk
- Troubleshooting and tips
- Help if problems occur
- Recovering drive contents from the Recovery DVD
- Restoring the system under Windows
- The notebook's date or time is incorrect
- When certain characters are entered on the keyboard, only numerals are written
- The notebook’s LCD screen remains blank
- The LCD screen is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The notebook cannot be started
- The notebook stops working
- The printer does not print
- The wireless connection to a network does not work
- SmartCard reader is not recognised.
- SmartCard PIN forgotten
- SmartCard lost
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- Index
Troubleshooting and tips
The printer does not print
Printerdoesnot print
Cause Troubleshooting
The printer is not switched on. ► M ake sure that the printer is sw
itched
on and ready for operation (ref
er to the
documentation supplied with t
he printer).
The printer is not connected c
orrectly.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
The printer driver is faulty or not correctly
installed, or it is th e wrong printer driver.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
► Check whethe r the correct printer driver is
loaded (refer to the printer documentation).
The wireless connec
tion to a network does not work
Thewireless conne
ctiontoan etworkdoes notwork
Cause Troubleshooting
The wireless compo
nent is disabled.
► Switch the wireless component on (see
"
Switching the wireless components on and
off", Page 47).
The wireless component is enabled. Despite
this, the wireless connection to a netwo rk does
not work.
► Check whether the wireless connection is
switched on via the software.
► Further information on using the wireless
component can be found in the help files.
SmartCard re
ader is not recognised.
Cause
Troubleshooting
Chip card inserted incorrectly. ► Check if you inserted your SmartCard into
the S martCard reader correctly.
► Check whether the SmartCard you are using
is supported. Your SmartCard must comply
with the ISO standard 7816 -1, - 2, -3 and -4.
SmartCard PIN forgotten
Cause
Troubleshooting
PIN for
gotten
► If you a
re working in a network, contact your
system
administrator, who can unlock your
notebo
ok with a Supervisor PIN.
Fujitsu 75