Datasheet

Data Sheet FUJITSU Server PRIMERGY TX200 S7 Dual socket Intel® Xeon® processor tower server
Page 6 / 9 www.fujitsu.com/fts
Electrical values
Power supply conguration Base unit specic:
1x standard power supply or1x hot-plug power supply or 2x hot plug power supply for redundancy
Standard power supply output 800 W (90 % efciency, 80 PLUS gold)
Hot-plug power supply output 450 W or 800 W (94 % efciency, 80 PLUS platinum)
Hot-plug power supply redundancy Yes
Rated voltage range 100 V - 240 V
Rated frequency range 47 Hz - 63 Hz
Rated current max. 7.6 A The rated current in basic conguration values are pending conrmation.
Active power (min. conguration) 65 W
Active power (max. conguration) 432 W
Active power note To estimate the power consumption of different congurations use the Power Calculator of the System Architect: http://
congurator.ts.fujitsu.com/public/
Apparent power (max. conguration) 435 VA
Heat emission 1555.2 kJ/h (1474.0 BTU/h)
Compliance
Global CB
RoHS (Restriction of hazardous substances)
WEEE (Waste electrical and electronical equipment)
Germany TÜV GS
Europe CE Class A *
USA/Canada CSAc/us
ULc/us
FCC Class A
Japan VCCI Class A + JIS 61000-3-2
China CCC (planned)
Australia/New Zealand C-Tick
Taiwan BSMI
Compliance link http://globalsp.ts.fujitsu.com/sites/certicates
Compliance notes There is general compliance with the safety requirements of all European countries and North America. National
approvals required in order to satisfy statutory regulations or for other reasons can be applied for on request.
* Warning:
This is a class A product. In a domestic environment this product may cause radio interference in which case the user
may be required to take adequate measures.