Datasheet

Data Sheet FUJITSU Server PRIMERGY TX140 S2 Mono-Socket Intel® Xeon® processor server
Page 3 / 9 www.fujitsu.com/fts
Technical details
PRIMERGY TX140 S2
Base unit PRIMERGY TX140 S2 LFF PRIMERGY TX140 S2 SFF PRIMERGY TX140 S2 LFF PRIMERGY TX140 S2 SFF
Housing types Tower Tower Tower Tower
Storage drive architecture 3.5-inch 2.5-inch 3.5-inch 2.5-inch
Power supply Standard Standard Hot-plug Hot-plug
Mainboard
Mainboard type D3239
Chipset Intel® C224
Processor quantity and type 1 x Intel® Pentium® processor / Intel® Core™ i3 processor / Intel® Xeon® processor E3-1200v3 product family
Processor Intel® Core™ i3-4330 processor
(2C/4T, 3.50 GHz, TLC: 4 MB, Turbo: No, 1,600 MHz, 54 W)
Intel® Pentium® processor G3420
(2C/2T, 3.20 GHz, TLC: 3 MB, Turbo: No, 1,600 MHz, 54 W)
Intel® Xeon® processor E3-1220v3
(4C/4T, 3.10 GHz, TLC: 8 MB, Turbo: Yes, 1,600 MHz, 80 W)
Intel® Xeon® processor E3-1230v3
(4C/8T, 3.30 GHz, TLC: 8 MB, Turbo: Yes, 1,600 MHz, 80 W)
Intel® Xeon® processor E3-1240v3
(4C/8T, 3.40 GHz, TLC: 8 MB, Turbo: Yes, 1,600 MHz, 80 W)
Intel® Xeon® processor E3-1265Lv3
(4C/8T, 2.50 GHz, TLC: 8 MB, Turbo: Yes, 1,600 MHz, 45 W)
Intel® Xeon® processor E3-1270v3
(4C/8T, 3.50 GHz, TLC: 8 MB, Turbo: Yes, 1,600 MHz, 80 W)
Intel® Xeon® processor E3-1280v3
(4C/8T, 3.60 GHz, TLC: 8 MB, Turbo: Yes, 1,600 MHz, 82 W)
Memory slots 4
Memory slot type DIMM (DDR3) UDIMM
Memory capacity (min. - max.) 4 GB - 32 GB
Memory protection ECC
Memory options 2 GB (1 module(s) 2 GB) DDR3, unbuffered, ECC, 1,600 MHz, PC3-12800, DIMM, single rank
4 GB (1 module(s) 4 GB) DDR3, unbuffered, ECC, 1,600 MHz, PC3-12800, DIMM, dual rank
8 GB (1 module(s) 8 GB) DDR3, unbuffered, ECC, 1,600 MHz, PC3-12800, DIMM, dual rank
Memory modules notes 1333MHz or 1600 MHz memory modules
Interfaces
USB 2.0 ports 6 (4x external rear, 2x internal for UFM or backup device, no USB wakeup supported)
USB 3.0 ports 4 (2x external rear, 2x external front)
Graphics (15-pin) 1 analog graphics interface derived from iRMC (up to 1600x1200 or 1920x1080 at 16bpp)
Serial connection 1 x serial RS-232-C, usable for iRMC or system or shared
LAN / Ethernet 2 x1 Gb/s Ethernet; RJ45
Management LAN (RJ45) 1 x dedicated management LAN port for iRMC S4 (10/100/1000 Mbit/s)
Management LAN trafc can be switched to shared onboard Gbit LAN port
Onboard or integrated Controller
RAID controller Optionally integrated RAID 0/1 or RAID 5/6 controller for SAS base units (occupies one PCIe slot).
additional RAID controller options are described under Components RAID controller
SATA Controller Intel® C224, 2 ports used for accessible drives
4 port for internal SATA HDDs with RAID 0, 1, 10 for Windows and Linux;