Datasheet

Data Sheet FUJITSU Server PRIMERGY RX2520 M1 Dual socket 2 U rack server
Page 4 / 10 www.fujitsu.com/fts
Onboard or integrated Controller
RAID controller 4 port for internal 3 Gbit/s SATA and 3 Gbit/s SAS (as upgrade option with SAS enabling key) for HDDs with RAID 0/1/10
(Intel C600)
additional RAID controller options are described under Components RAID controller
SATA Controller Intel® C600, 1 x SATA channel for ODD
LAN Controller Intel® Ethernet Controller I210, 2 x 1Gbit/s Ethernet Controller (10/100/1000 Mbit/s), PXE-Boot via LAN from PXE server,
iSCSI boot (also diskless)
Remote Management Controller IPMI 2.0 compatible
Integrated Remote Management Controller (iRMC S4, 256 MB attached memory incl. graphics controller)
Trusted Platform Module (TPM) Inneon / separate module; TCG V1.2 compliant (option)
Slots
PCI-Express 3.0 x8 6 x Low prole
PCI-Express 2.0 x4 (mech. x8) 1 x Low prole
Slot Notes Important: The number of PCIe slots depends on the number of CPUs:
5x PCIe x8 Gen 3 (2x CPU1; 3x CPU2; mechanical x8)
1x PCIe x4 Gen 2 (PCH; mechanical x8)
Internal Slots:
1x PCIe x8 Gen 3 (CPU1; mechanical x8)
Drive bays
Storage drive bays 2.5-inch base unit (max. 16 x 2.5) or 3.5-inch base unit (max. 12 x 3.5)
Accessible drive bays 1 x 5.25/0.5-inch for ODD
1 x 5.25/0.5-inch for Local Service Display
1 x 3.5/1.6-inch for backup devices
1 x 5.25/1.6-inch for backup devices
Notes accessible drives All possible options described in relevant system congurator.
Drive bays (Base unit specic)
Storage drive bays Max 8 x 3.5-inch Max 16 x 2.5-inch
Optional accessible drives ODD 5.25” possible LTO 5.25” or DAT/RDX 3.5” possible
General system information
Number of fans 2
Fan conguration hot-plug / optional redundant
Fan notes 2 +1 redundant option, additional fan for 2nd CPU
Operating panel
Operating buttons On/off switch
Reset button
NMI button
ID button
Status LEDs System status (orange / yellow)
Identication (blue)
Hard disks access (green)
Power (amber / green)
At system rear side:
System status (orange / yellow)
Identication (blue)
LAN connection (green)
LAN speed (green / yellow)
Service display Optional:
ServerView Local Service Display (LSD)