Datasheet

Data Sheet FUJITSU Server PRIMERGY RX1330 M1 rack server
Page 6 / 9 www.fujitsu.com/fts
Environmental
Sound power (LWAd; 1B = 10dB) 3.7 / 5.1 B (min / max idle), 4.2 / 5.5 B (min / max operating)
Noise notes Noise emissions and operation modes depend on system conguration.
Electrical values
Power supply conguration 1x standard power supply or1x hot-plug power supply or 2x hot plug power supplies for redundancy
Max. output of single power supply 450 W
Standard power supply output 300 W (92% efciency)
Hot-plug power supply output 450W (94% efciency)
Hot-plug power supply redundancy Yes
Rated voltage range 100 V - 127 V / 200 V - 240 V
Rated frequency range 50 Hz - 60 Hz
Rated current max. 4.0 A
Rated current in basic conguration 1.8 A / 0.8 A (100V / 240V)
Active power (max. conguration) 197 W
Active power note To estimate the power consumption of different congurations use the Power Calculator of the System Architect: http://
congurator.ts.fujitsu.com/public/
Apparent power (max. conguration) 199 VA
Heat emission 709.2 kJ/h (672.2 BTU/h)
Compliance
Global CB
RoHS (Substance limitations in accordance with global RoHS regulations)
WEEE (Waste electrical and electronical equipment)
Germany GS
Europe CE Class A *
USA/Canada CSAc/us
ULc/us
FCC Class A
Japan VCCI
Russia GOST
South Korea KC
China CCC
Australia/New Zealand C-Tick
Taiwan BSMI
Compliance link http://globalsp.ts.fujitsu.com/sites/certicates
Compliance notes There is general compliance with the safety requirements of all European countries and North America. National
approvals required in order to satisfy statutory regulations or for other reasons can be applied for on request.
* Warning:
This is a class A product. In a domestic environment this product may cause radio interference in which case the user
may be required to take adequate measures.