Datasheet

Data Sheet FUJITSU Server PRIMERGY RX1330 M1 rack server
Page 3 / 9 www.fujitsu.com/fts
Technical details
PRIMERGY RX1330 M1
Base unit RX1330 M1 LFF RX1330 M1 LFF RX1330 M1 SFF RX1330 M1 SFF RX1330 M1 SFF
10xSFF
Housing types Rack Rack Rack Rack Rack
Storage drive architecture 3.5-inch SAS/SATA 3.5-inch SAS/SATA 2.5-inch SAS/SATA 2.5-inch SAS/SATA 2.5-inch SAS/SATA
Power supply Standard Hot-plug Standard Hot-plug Hot-plug
Mainboard
Mainboard type D3229
Chipset Intel® C226
Processor quantity and type 1 x Intel® Xeon® processor E3-1200v3 product family / Intel® Core™ i3 processor / Intel® Pentium® processor / Intel®
Celeron® processor
Processor Intel® Celeron® processor G1820 (2C/2T, 2.70 GHz, TLC: 2 MB, Turbo: No, Mem bus: 1,333 MHz, 54 W)
Intel® Core™ i3-4330 processor (2C/4T, 3.50 GHz, TLC: 4 MB, Turbo: No, Mem bus: 1,600 MHz, 54 W)
Intel® Pentium® processor G3420 (2C/2T, 3.20 GHz, TLC: 3 MB, Turbo: No, Mem bus: 1,600 MHz, 54 W)
Intel® Xeon® processor E3-1220v3 (4C/4T, 3.10 GHz, TLC: 8 MB, Turbo: 3.30 GHz, Mem bus: 1,600 MHz, 80 W)
Intel® Xeon® processor E3-1231v3 (4C/8T, 3.40 GHz, TLC: 8 MB, Turbo: 3.60 GHz, Mem bus: 1,600 MHz, 80 W)
Intel® Xeon® processor E3-1240Lv3 (4C/8T, 2.00 GHz, TLC: 8 MB, Turbo: 2.80 GHz, Mem bus: 1,600 MHz, 25 W)
Intel® Xeon® processor E3-1241v3 (4C/8T, 3.50 GHz, TLC: 8 MB, Turbo: 3.70 GHz, Mem bus: 1,600 MHz, 80 W)
Intel® Xeon® processor E3-1271v3 (4C/8T, 3.60 GHz, TLC: 8 MB, Turbo: 3.80 GHz, Mem bus: 1,600 MHz, 80 W)
Intel® Xeon® processor E3-1275Lv3 (4C/8T, 2.70 GHz, TLC: 8 MB, Turbo: 3.30 GHz, Mem bus: 1,600 MHz, 45 W)
Intel® Xeon® processor E3-1281v3 (4C/8T, 3.70 GHz, TLC: 8 MB, Turbo: 3.90 GHz, Mem bus: 1,600 MHz, 82 W)
Intel® Xeon® processor E3-1286v3 (4C/8T, 3.70 GHz, TLC: 8 MB, Turbo: 3.90 GHz, Mem bus: 1,600 MHz, 84 W)
Memory slots 4 (2 banks with 2 DIMMs each)
Memory slot type DIMM (DDR3) UDIMM
Memory capacity (min. - max.) 2 GB - 32 GB
Memory protection ECC
Memory notes Dual channel support. For dual channel performance, a minimum of 2 memory modules have to be ordered. Capacity
per channel has to be the same.
Memory options 4 GB (1 module(s) 4 GB) DDR3, unbuffered, ECC, 1,600 MHz, PC3-12800, DIMM, single rank
8 GB (1 module(s) 8 GB) DDR3, unbuffered, ECC, 1,600 MHz, PC3-12800, DIMM, dual rank
Interfaces
USB 2.0 ports 4 x (2x rear, 2x internal) (10x SFF base unit: 1x front, 2x rear, 2x internal)
USB 3.0 ports 4 x (2x front, 2x rear) (10x SFF base unit: 2x rear)
Graphics (15-pin) 1 x VGA (15-pin) / optional 1 x front VGA (not for 10x 2,5” HDD base unit)
Serial connection 1 x serial RS-232-C, usable for iRMC S4 or system or shared
LAN / Ethernet (RJ-45) 2 x Gbit/s Ethernet
Management LAN (RJ45) 1 x dedicated management LAN port for iRMC S4 (10/100/1000 Mbit/s)
Management LAN trafc can be switched to shared onboard Gbit LAN port
Onboard or integrated Controller
RAID controller Integrated RAID 0/1 or RAID 5/6 controller (option)
additional RAID controller options are described under Components RAID controller
SATA Controller Intel® C226, 1 port used for accessible drive
4 port for internal SATA HDDs with RAID 0, 1, 10 for Windows and Linux;
LAN Controller Intel® i210 onboard. 2 x 10/100/1000 Mbit/s Ethernet (TCP/IP acceleration). iSCSI, PXE-Boot and WoL are supported
Remote management controller Integrated Remote Management Controller (iRMC S4, 256 MB attached memory incl. graphics controller)
IPMI 2.0 compatible
Trusted Platform Module (TPM) optional TPM
Onboard or integrated Controller (Base unit specic)
RAID controller 4 port SATA with RAID 0/1/10 for HDDs 4 port SATA with RAID 0/1/10 for HDDs