User Manual
Table Of Contents
- FUJITSU LIFEBOOK E5412 | E5512
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the notebook
- Status indicators
- Switching on the notebook
- Switching off the notebook
- Keyboard
- Touchpad and touchpad buttons
- Touchscreen/LCD screen without touch function (device-dependent)
- WebCam and Infrared Camera
- Rechargeable battery
- Using the power-management features
- Memory cards
- Loudspeakers and microphones
- SIM card (configuration dependent)
- Wireless components Wireless LAN€/ Bluetooth€/ LTE (optional)
- Ethernet and LAN
- Your Port Replicator
- Security functions
- Connecting external devices
- Removing and installing components during servicing
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating the BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Erase Disk
- Troubleshooting and tips
- Help if problems occur
- Recovering drive contents from the Recovery DVD
- Restoring the system under Windows
- The notebook's date or time is incorrect
- When certain characters are entered on the keyboard, only numerals are written
- The notebook’s LCD screen remains blank
- The LCD screen is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The notebook cannot be started
- The notebook stops working
- The printer does not print
- The wireless connection to a network does not work
- SmartCard reader is not recognised.
- SmartCard PIN forgotten
- SmartCard lost
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- Index
Troubleshooting and tips
The printer does not print
Printerdoesnot print
Cause Tro ub lesho ot ing
The printer is not switched on. ► Make sure that the printer is sw
itched
on and ready for operation (ref
er to th e
documentation supplied with t
he printer).
The p rinter is not connected c
orrectly.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
The printer drive r is faulty or not co rrectly
installed, or it is the wrong printer driver.
► Check that the data cable connecting
the notebook to the printer is properly
connected.
► Check whether the correct printer driver is
loaded (refer to the printer documentation).
The wireless connec
tiontoanetworkdoesnotwork
Thewireless conne
ctiontoan etworkdoes notwork
Cause Tro ub lesho ot ing
The wireless compo
nent is disabled.
► Switch the wireless c omponen t on (see
"
Switch ing t he wireless compo nents on and
off", Page 44).
The wireless component is enabled. Despite
this, the wireless connection to a network does
not work.
► Check whether the wireless connection is
switched on via the software.
► Further information on using the wireless
component can be found in the help files.
SmartCard re
ader is not recognised.
Cause
Troubleshooting
Chip card inserted incorrectly. ► Check if you inserted your SmartCard into
the SmartCard reader correctly.
► Check whether the SmartC ard you are using
is supported. Your SmartCard must comply
with the ISO standard 7816-1, -2, -3 and -4.
SmartCard PIN forgotten
Cause
Troubleshooting
PIN for
gotten
► If you a
re working in a network, contact your
system
administrator, who can u nlock your
notebo
ok with a Supervisor P IN.
72 Fujitsu