User Manual
Table Of Contents
- FUJITSU LIFEBOOK E5412 | E5512
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the notebook
- Status indicators
- Switching on the notebook
- Switching off the notebook
- Keyboard
- Touchpad and touchpad buttons
- Touchscreen/LCD screen without touch function (device-dependent)
- WebCam and Infrared Camera
- Rechargeable battery
- Using the power-management features
- Memory cards
- Loudspeakers and microphones
- SIM card (configuration dependent)
- Wireless components Wireless LAN€/ Bluetooth€/ LTE (optional)
- Ethernet and LAN
- Your Port Replicator
- Security functions
- Connecting external devices
- Removing and installing components during servicing
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating the BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Erase Disk
- Troubleshooting and tips
- Help if problems occur
- Recovering drive contents from the Recovery DVD
- Restoring the system under Windows
- The notebook's date or time is incorrect
- When certain characters are entered on the keyboard, only numerals are written
- The notebook’s LCD screen remains blank
- The LCD screen is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The notebook cannot be started
- The notebook stops working
- The printer does not print
- The wireless connection to a network does not work
- SmartCard reader is not recognised.
- SmartCard PIN forgotten
- SmartCard lost
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- Index
Connecting e xtern a l devices
Connecting an external monitor
An analogue screen is connected to the analogue VGA screen port and a digital screen
to the display port or H DMI port on the optional port rep licator.
The HDMI port on your notebook or the optional port replicator can also be used to connect
an external amplifier, LCD TV or a plasma TV with an HDMI connection.
Screen o utput is limited to a maximum of four screens at the same time. The
settings of the screens can be configured in Windows.
MonitorDisplayportVGADisplay PortHDMIportScreenportMonitorportScreenportScreenport
Digital HDM I port (on LIFE BO O K or optional
port replicator)
Analogue VGA monitor port (on optional port
replicator)
Digital display po rt (on the optional port
replicator)
► Switch
off the notebook and the external monitor.
► Plug the data cable of the external monitor into the monitor port.
► First s
witch on the external monitor and then the notebook.
You ca
n also switch between the external monitor and the LCD monitor of the
noteb
ook, see c hapter "
Functio n keys and key combinations", Page 28.
You c
an display th e same picture on the external monitor and the
note
book LCD monitor simultaneously.
Fujitsu 57