User Manual
Table Of Contents
- FUJITSU LIFEBOOK E5412 | E5512
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the notebook
- Status indicators
- Switching on the notebook
- Switching off the notebook
- Keyboard
- Touchpad and touchpad buttons
- Touchscreen/LCD screen without touch function (device-dependent)
- WebCam and Infrared Camera
- Rechargeable battery
- Using the power-management features
- Memory cards
- Loudspeakers and microphones
- SIM card (configuration dependent)
- Wireless components Wireless LAN€/ Bluetooth€/ LTE (optional)
- Ethernet and LAN
- Your Port Replicator
- Security functions
- Connecting external devices
- Removing and installing components during servicing
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating the BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Erase Disk
- Troubleshooting and tips
- Help if problems occur
- Recovering drive contents from the Recovery DVD
- Restoring the system under Windows
- The notebook's date or time is incorrect
- When certain characters are entered on the keyboard, only numerals are written
- The notebook’s LCD screen remains blank
- The LCD screen is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The notebook cannot be started
- The notebook stops working
- The printer does not print
- The wireless connection to a network does not work
- SmartCard reader is not recognised.
- SmartCard PIN forgotten
- SmartCard lost
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- Index
Working with the notebook
Virtual numeric keypad
NumerickeypadVirtualnumeric ke ypadNumLock
LIFEBOOK E5412 has a virtual number pad, whereas LI FEBO OK
E5512 has a separate number pad.
To provide the convenience of a numeric keypad, your keyboard is equipped with a virtual
numeric keypa d. The special keys of the virtual numeric keypad are recognisable by the numbers
and symbols printed in the upper right corner of each key. If you have sw itched on the virtual
numeric keypad, you can output the ch aracters shown on the upper right of the keys.
The k eyboard layout shown below may differ from your actual device.
1 = Valid characters when the
Num
key is not activated
2 = Valid characters when the
Num
is activated
Further information about the status indicators can be found in chapter "
Status indicat ors", Page 22.
Default settings
With default settings, each button must be pressed in combination with
Fn
in order
to enter the characters of the virtual numeric keypad.
In the BIOS setup utility, you can enable the function that allows you to enter the
characters of the virtual numeric keypad directly without
Fn
.
► To do so, in the Advanced-Keyboard Features menu se lect On or Off instead of On/Padlock Off.
With Windows, the Num Lock function can still be switched o n and off using the
Num key regardless of whether On or
Off
is set in the BIOS.
Fujitsu 27