User Manual

First-time setup of your device
Selecting a location
SelectingalocationDeviceMainsadapter
Select a suitable location for the device before setting it up. F ollow
the instructions below when doing so:
• Never place the device or the mains adapter on a heat-sensitive surface.
The surface could be damaged as a result.
• Never place the device on a soft surface (e.g. carpeting, uph olstered furniture,
bed). This can block the air vents and cause overheating and damage.
• The underside of the device heats up during normal operation. Prolonged contact
with the skin may become unpleasant or even result in burns.
• Place the device on a stable, flat, non-slippery surface. Please note that the
rubber feet of the device ma y mark certain types of delicate surfaces.
• Keep other objects at least 100 mm / 3.94 inches away from the device
and its mains adapter to ensure adequate ventilation.
• Never cover t he ventilation slots of the device.
• Do not expose the device to extreme environmental c onditions. Protect
the device from dust, humidity, and heat.
Connecting the mains adapter
Preparingforo perationMainsadapter
Observe the safety notes in the enclosed "Safety/Regulations" manual.
The supplied pow er cable conforms to the requirements of the count ry in
which you purchased your device. Make sure that the power cable is approved
for use in the country in w hich you intend to use it.
3
1
2
► Connect the power cable (1) to the power
adapter provided for the device, see
chapter "
Technical data", Page 76.
► Plug the mains cable (2) into a mains outlet.
► Connect the USB Type-C cable (3) of
the power ada pter to one of the two
Intel® Thunderbolt™ 4 USB pow er
ports of the device.
20 Fujitsu