User Manual
Table Of Contents
- FUJITSU LIFEBOOK E5412 | E5512
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the notebook
- Status indicators
- Switching on the notebook
- Switching off the notebook
- Keyboard
- Touchpad and touchpad buttons
- Touchscreen/LCD screen without touch function (device-dependent)
- WebCam and Infrared Camera
- Rechargeable battery
- Using the power-management features
- Memory cards
- Loudspeakers and microphones
- SIM card (configuration dependent)
- Wireless components Wireless LAN€/ Bluetooth€/ LTE (optional)
- Ethernet and LAN
- Your Port Replicator
- Security functions
- Connecting external devices
- Removing and installing components during servicing
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating the BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Erase Disk
- Troubleshooting and tips
- Help if problems occur
- Recovering drive contents from the Recovery DVD
- Restoring the system under Windows
- The notebook's date or time is incorrect
- When certain characters are entered on the keyboard, only numerals are written
- The notebook’s LCD screen remains blank
- The LCD screen is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The notebook cannot be started
- The notebook stops working
- The printer does not print
- The wireless connection to a network does not work
- SmartCard reader is not recognised.
- SmartCard PIN forgotten
- SmartCard lost
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- Index
Important notes
Additional safety notes for devices with
wireless components
Wirelesscom ponent:WirelessLAN:Bluetooth,safetynotes
If a wireless c omponent (W ireless LAN, Bluetooth, UMTS, LTE. 5G) is incorporated in your
notebook, y ou must be sure to o bse rve the f ollowing safety notes when using your noteb ook:
• Switch off the wireless compone nts when you are in an aircraft or driving in a car.
• Switch off the wireless components when you are in a hospital, an operating
room or near a medical electronics system. The transmitted r adio waves
can impair the opera tion of medica l devices.
• Switch off the wireless components when you let the device get near flammable
gases or into hazardous environments (e.g. petrol station, paintshops), as the
transmitted radio waves can cause an explosion or a fire.
For information on how to switch wireless components on and off, see chapter
"
Switching the wireless components on and off", Page 44.
Energy saving
NotesEnergyEnergysaving
Switch the notebo
ok off when it is not in use. Switch off external, connected devices if you
are not using the
m. If you use the energy saving functions, the no tebook uses less energy.
You will then be
able to work for longer before having to recharge the battery.
Energy efficien
cy is increased and the environmental impact is reduced.
You save money
while protecting the environment.
Energy savin
g under Windows
► Make use of the power management features (see ""Using the power-management features",
Page 38").
16 Fujitsu