User Manual
Table Of Contents
- FUJITSU LIFEBOOK E5411 | FUJITSU LIFEBOOK E5511
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the notebook
- Status indicators
- Switching on the notebook
- Notebook: switching off
- Keyboard
- Touchpad and touchpad buttons
- LCD screen
- WebCam and Infrared Camera
- Rechargeable battery
- Using the power-management features
- Memory cards
- Loudspeakers and microphones
- SIM card (configuration dependent)
- Wireless components Wireless€LAN / Bluetooth / LTE
- Ethernet and LAN
- Port Replicator (optional)
- Security functions
- Connecting external devices
- Removing and installing components during servicing
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating the BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Erase Disk
- Troubleshooting and tips
- Help if problems occur
- Restore contents of the hard disk from Recovery CD/DVD
- Restoring the system under Windows€10
- The notebook's date or time is incorrect
- When certain characters are entered on the keyboard, only numerals are written
- The notebook’s LCD screen remains blank
- The LCD screen is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The notebook cannot be started
- The notebook stops working
- The printer does not print
- The wireless connection to a network does not work
- SmartCard reader is not recognised.
- SmartCard PIN forgotten
- SmartCard lost
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- Index
Removing and installing c omponents
during servicing
Removing and installing compo
nents
during servicing
The illustrations show n below may differ from your actual device. They are
merely intended to clarify the principles involved.
Only q ualified technicians should repair your notebook. Unauthorised
opening o r incorrect repair may greatly endanger the user (electric shock,
fire risk) and will invalidate your warranty.
Components
Serv icing
After consulting the Hotline/Service Desk, you may remove and install the
components described in this chap ter yourself.
If you remove and install components without consulting the Hotline/Service
Desk, then the w arranty of y our notebook will be voided.
Notes on installing and removing boards
and components
• Switch the notebook off and pu ll the power plug out of the ma ins socket.
• Always remove the battery.
• Take care when you use the locking mechanisms on the battery and any other component.
• Never use sharp objects such as screwdrivers, scissors or knives as leverage to remove covers.
NotesBoardESD
Boards with el
ectrostatic sensitive devices (ESD) are marked w ith the label
shown.
When handli
ng boards fitted w ith ESDs, you must always observe the following
points:
• You must alw
ays discharge static build up (e.g. by touching a grou nded
object) be
fore working.
• The equipm ent and tools you use m u st be free of static charges.
•Removeth
e power plug from the mains supply before inserting or removing
boards co
ntaining ESDs.
• Always hold boards with ESDs b y their edges.
• Never to
uch pins or c onductors on boards fitted with ESDs.
64 Fujitsu