User Manual
Table Of Contents
- FUJITSU LIFEBOOK E5411 | FUJITSU LIFEBOOK E5511
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the notebook
- Status indicators
- Switching on the notebook
- Notebook: switching off
- Keyboard
- Touchpad and touchpad buttons
- LCD screen
- WebCam and Infrared Camera
- Rechargeable battery
- Using the power-management features
- Memory cards
- Loudspeakers and microphones
- SIM card (configuration dependent)
- Wireless components Wireless€LAN / Bluetooth / LTE
- Ethernet and LAN
- Port Replicator (optional)
- Security functions
- Connecting external devices
- Removing and installing components during servicing
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating the BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Erase Disk
- Troubleshooting and tips
- Help if problems occur
- Restore contents of the hard disk from Recovery CD/DVD
- Restoring the system under Windows€10
- The notebook's date or time is incorrect
- When certain characters are entered on the keyboard, only numerals are written
- The notebook’s LCD screen remains blank
- The LCD screen is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The notebook cannot be started
- The notebook stops working
- The printer does not print
- The wireless connection to a network does not work
- SmartCard reader is not recognised.
- SmartCard PIN forgotten
- SmartCard lost
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- Index
Working with the notebook
SIM card (configuration dependent)
The LIFEBOO K E5511 is shown below. The proced ure is identical for b oth device variants.
All device variants support nano SIM cards.
A SIM Card (Subscriber Identity Module) is a chip card which is inserted in a mobile telephone or
notebook and, together with an integrated LTE m odule, enables access to a mobile radio network.
Follow the instructions supplied by the provider of the S IM card.
The SIM card slot is located in the battery co mpartme nt and can only
be accessed when the battery is removed.
Inserting the SIM car
d
► Prepare for installation of the SIM card, see chapter "Preparing to remove components " , Page 65.
► Remov e the battery
,see"
Removing a battery", Page 37.
2
1
1
3
2
a
b
► Pull the SIM card holder o ut of the slot (1).
► Insert the SIM card (a) into the SIM c ard holder (2) as shown in the
diagram on the SIM card holder (b).
► Slide the SIM card holder back into its slot (3).
► Install the battery again, see "
Install ing a battery", Page 38.
► Complete the installation, see "
Finishin g c omponent removal", Page 70.
Fujitsu 43