User Manual
Table Of Contents
- FUJITSU LIFEBOOK E5411 | FUJITSU LIFEBOOK E5511
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the notebook
- Status indicators
- Switching on the notebook
- Notebook: switching off
- Keyboard
- Touchpad and touchpad buttons
- LCD screen
- WebCam and Infrared Camera
- Rechargeable battery
- Using the power-management features
- Memory cards
- Loudspeakers and microphones
- SIM card (configuration dependent)
- Wireless components Wireless€LAN / Bluetooth / LTE
- Ethernet and LAN
- Port Replicator (optional)
- Security functions
- Connecting external devices
- Removing and installing components during servicing
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating the BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Erase Disk
- Troubleshooting and tips
- Help if problems occur
- Restore contents of the hard disk from Recovery CD/DVD
- Restoring the system under Windows€10
- The notebook's date or time is incorrect
- When certain characters are entered on the keyboard, only numerals are written
- The notebook’s LCD screen remains blank
- The LCD screen is difficult to read
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The notebook cannot be started
- The notebook stops working
- The printer does not print
- The wireless connection to a network does not work
- SmartCard reader is not recognised.
- SmartCard PIN forgotten
- SmartCard lost
- Error messages on the screen
- Technical data
- Manufacturer’s notes
- Index
Working with the noteb ook
Adjusting fan control
You can adjust the fan control in the BIOS Setup U tility. The following settings are available:
• Normal: The system is co oled to ensure t hat the m aximum system performance is always
available and to keep the housing temperature as low as possible.
• Silent: The fa n rotation sp eed, and therefore the noise created by the fan, is reduced.
► Call up the BIOS Setup Utility.
► In the menu Advanced - Miscellaneous Configurations select the Fan Control function.
► Choose the setting Normal or Silent.
Instructions for how to call up and operate the BIOS-Setup-Utility can be found
in chapter "
Settings in BIOS Setup Utility", Page 71.
With the Fujitsu Utility Function Manager you can also switch between these two
settings with Windows. In the Function Manager, select the Fan menu item with
the options Quiet Mode (corresponds to Silent)andNormal Mode.
40 Fujitsu