Datasheet

Data Sheet Fujitsu PRIMERGY BX400 S1 Blade Server
Page 3 / 6 http://ts.fujitsu.com/Primergy
Technical details
Enclosure
System unit type 6 U chassis for 19-inch rack, or oorstand version
Front bays 8 half height bays for server or storage blades
Midplane High speed midplane with 3 fabrics
Rear bays 4 x for Connection Blades
4 x for PSU/fan modules
Management Blades 1x hot-plug management blade as standard, redundant management blades as option
Fan conguration Up to 3 hot plug, redundant rear fan units (2 fans per unit)
Power supply conguration Up to 4x hot-plug power supply modules (1x as standard)
Operating panel
Operating buttons On/off switch
ID button
Status LEDs Power (amber / green)
System status (amber / yellow)
Identication (blue)
Service display ServerView Local Service Display for Blade (LSB)
ODD 1 - assinged to server blade by MMB control
USB ports 2 - assigned to server blade by MMB control
Management Blade
Type of Unit BX900 MMB S1
LAN / Ethernet (RJ-45) 2 x 1Gb Ethernet
Service LAN (RJ45) Dedicated Service LAN port for MMB (1Gb Ethernet)
Serial 1 (9-pin) 1 x RS-232-C
USB ports 2 x (at rear side of the system)
Dimensions / Weight
Floor-stand (W x D x H) 578 x 819 x 366 mm
Rack (W x D x H) 445 x 785 x 267 mm
Mounting Depth Rack 818 mm
Height Unit Rack 6 U
19” rackmount Yes
Weight Rack: up to 98 kg / Floorstand: up to 112.5 kg
Weight notes Fully assembled
Actual weight may vary depending on conguration
Rack integration kit Included in Rack System
Electrical values
Max. input of single power supply 1200 W / 1785 W (100 V - 240 V)
Power supply conguration note max. 4 PSU in n, n+1 or n+n redundancy conguration.
Power supply efciency 92% (at 50% PSU load, CSCI “gold”)
Rated voltage range 100 V - 240 V
Rated frequency range 50 Hz - 60 Hz
Rated current max. 45 A / 22.5 A (100 V - 240 V)
Electrical value notes Active power max. value depends on system conguration.
For details see Power Conguration Tool.
Power plug: non industrial type a connector (100V) e.g. NEMA 5-15P or 5-20P / industrial type b connector (230V)
e.g. IEC60309
Environmental
Noise emission Measured according to ISO 7779 and declared according to ISO 9296