Design Technical Manual

Table Of Contents
2-21. DUCT STATIC PRESSURE SETTING
MODEL: ARUL4TLAV1
MODELS: ARUL7TLAV, ARUL9TLAV, ARUL12TLAV, ARUL14TLAV,
ARUL18TL AV
MODELS: ARUM24TLAV, ARUM30TLAV, ARUM36TLAV
MODELS: ARUH72TLAV1, ARUH96TLAV
Change the airow setting when the external static pressure is di󰀨erent than the default static
pressure.
Static pressure setting can be performed using: wireless remote controller, wired remote
controller, and simple remote controller.
How to set airow (external static pressure)
Wireless remote controller
Airow is set by function number 26 (static pressure).
Refer to "BUTTON NANE AND FUNCTION", "FUNCTION SETTING" and "FUNCTION
DETAILS" in 2-3. INDOOR UNIT (setting by wireless remote controller).
Wired remote controller
Airow is set by function number 26 (static pressure).
Refer to "BUTTON NANE AND FUNCTION", "FUNCTION SETTING" and "FUNCTION
DETAILS" in 2-4. INDOOR UNIT (setting by wired remote controller).
Simple remote controller
Airow is set by function number 26 (static pressure).
Refer to "BUTTON NANE AND FUNCTION", "FUNCTION SETTING" and "FUNCTION
DETAILS" in 2-5. INDOOR UNIT (setting by simple remote controller).
Wired remote controller (Touch panel)
Airow is set by function number 26 (static pressure).
Refer to "FUNCTION SETTING" and "FUNCTION DETAILS" in 2-6. INDOOR UNIT (setting
by wired remote controller [Touch panel]).
FAN PERFORMANCE CURVE
Refer to "7. FAN PERFORMANCE CURVE" in Chapter 4.
NOTE
If airow is set incorrectly, unit may perform incorrectly; insu󰀩cient airow or condensate
carry-over (water leakage) are possible.
- (07 - 151) -
FUNCTION
SETTING
FUNCTION
SETTING