Design Technical Manual

2-14-3. INDOOR UNIT ADDRESS VERIFICATION
1) Touch the [I.U. Address Verication] on the
“Maintenance” screen. “Installer Password
Verication” screen is displayed.
Previous
Page
Back
Next
Page
Page 2/ 3 Maintenance
Test Run
R.C. Address
Setting
Function Setting
I.U. Address
Verification
2) Enter the Installer Password and touch the [OK].
“I.U. Address Verication” screen is displayed.
Enter the Installer Password and touch the [OK].
“I.U. Address Verication” screen is displayed.
When the screen has multiple pages, they can be
switched by touching the [Next Page] or [Previous
Page].
1 002–1 01–01
/
002–2 01–02
/
2
002–3 01–03
/
3
002–4 01–04
/
4
002–5 01–05
/
5
002–6 01–06
/
6
/
Page 1/ 2 I.U. Address Verification
No. System–Unit Ref.–In.
Back
Check
Next
Page
3) Touch the [Check] on the “I.U. Address
Verication” screen.
1 002–1 01–01
/
002–2 01–02
/
2
002–3 01–03
/
3
002–4 01–04
/
4
002–5 01–05
/
5
002–6 01–06
/
6
/
Page 1/ 2 I.U. Address Verification
No. System–Unit Ref.–In.
Back
Check
Next
Page
4) When the [YES] on the verication screen of
indoor unit verication is touched, all indoor units
will stop, verication mode starts.
No Yes
I.U. Address Verification
Indoor unit position will be checked. OK?
5) When indoor unit position verication ends,
a screen displaying the indoor units in a list
is displayed. When the screen has multiple
pages, they can be switched by touching the
[Next Page] or [Previous Page].
1 002–1 01–01 /
2 002–2 01–02 /
3 002–3 01–03 /
/
End
Next
Page
Page 1/ 2 I.U. Address Verification
No. System–Unit Ref.–In.
End
Next
Page
Page 1/ 2 I.U. Address Verification
No. System–Unit Ref.–In.
When the indoor unit address to be veried is
touched, the appropriate indoor unit performs
the air blow and LED lamps blink*. (*Only when
the indoor unit has that function.)
1 002–1 01–01 /
2 002–2 01–02 /
3 002–3 01–03 /
/
End
Next
Page
Page 1/ 2 I.U. Address Verification
No. System–Unit Ref.–In.
6) When the [End] is touched, the display returns to
the screen of (2).
1 002–1 01–01 /
2 002–2 01–02 /
3 002–3 01–03 /
/
End
Next
Page
Page 1/ 2 I.U. Address Verification
No. System–Unit Ref.–In.
When the [Back] on the screen of (2) is touched, the
display returns to the “Maintenance” screen.
1 002–1 01–01
/
002–2 01–02
/
2
002–3 01–03
/
3
002–4 01–04
/
4
002–5 01–05
/
5
002–6 01–06
/
6
/
Page 1/ 2 I.U. Address Verification
No. System–Unit Ref.–In.
Back
Check
Next
Page
- (07 - 137) -
FUNCTION SETTING FUNCTION SETTING