Design Technical Manual
Table Of Contents
- CHAPTER00
- CHAPTER01_General_information
- CHAPTER02_Model_selection
- 1. MODEL SELECTION PROCEDURE
- 2. MODEL LINE UP
- 3. MODEL SELECTION AND CAPACITY CALCULATION
- 4. CAPACITY TABLE COOLING (OUTDOOR UNIT)
- 5. CAPACITY TABLE HEATING (OUTDOOR UNIT)
- 6. CAPACITY COMPENSATION COEFFICIENT
- 7. CAPACITY TABLE COOLING (INDOOR UNIT)
- 7-1. COMPACT CASSETTE TYPE
- 7-2. CIRCULAR FLOW CASSETTE TYPE
- 7-3. CASSETTE TYPE
- 7-4. MINI DUCT TYPE
- 7-5. SLIM DUCT / SLIM CONCEALED FLOOR TYPE
- 7-6. MEDIUM STATIC PRESSURE DUCT TYPE
- 7-7. HIGH STATIC PRESSURE DUCT TYPE
- 7-8. VERTICAL AIR HANDLER TYPE
- 7-9. COMPACT FLOOR TYPE
- 7-10. FLOOR / CEILING TYPE
- 7-11. CEILING TYPE
- 7-12. WALL MOUNTED TYPE
- 8. CAPACITY TABLE HEATING (INDOOR UNIT)
- 8-1. COMPACT CASSETTE TYPE
- 8-2. CIRCULAR FLOW CASSETTE TYPE
- 8-3. CASSETTE TYPE
- 8-4. MINI DUCT TYPE
- 8-5. SLIM DUCT / SLIM CONCEALED FLOOR TYPE
- 8-6. MEDIUM STATIC PRESSURE DUCT TYPE
- 8-7. HIGH STATIC PRESSURE DUCT TYPE
- 8-8. VERTICAL AIR HANDLER TYPE
- 8-9. COMPACT FLOOR TYPE
- 8-10. FLOOR / CEILING TYPE
- 8-11. CEILING TYPE
- 8-12. WALL MOUNTED TYPE
- CHAPTER03_Outdoor_units
- CHAPTER04_Indoor_units
- CHAPTER05_Control_system
- 1. CONTROL SYSTEM
- 2. CONTROL UNITS
- 2-1. SYSTEM CONTROLLER
- 2-2. SYSTEM CONTROLLER LITE
- 2-3. TOUCH PANEL CONTROLLER
- 2-4. CENTRAL REMOTE CONTROLLER
- 2-5. WIRED REMOTE CONTROLLER (Touch panel)
- 2-6. WIRED REMOTE CONTROLLER
- 2-7. SIMPLE REMOTE CONTROLLER (With Operation mode)
- 2-8. SIMPLE REMOTE CONTROLLER (Without Operation mode)
- 2-9. WIRELESS REMOTE CONTROLLER
- 2-10. IR RECEIVER UNIT (for ALL DUCT TYPE)
- 2-11. IR RECEIVER UNIT (for CASSETTE TYPE)
- 2-12. IR RECEIVER UNIT (for CIRCULAR FLOW CASSETTE TYPE)
- 2-13. HUMAN SENSOR KIT (for CIRCULAR FLOW CASSETTE TYPE)
- 2-14. REMOTE SENSOR UNIT
- 2-15. PRESSURE SENSOR KIT
- 2-16. GROUP CONTROL METHOD
- 2-17. COMPARISON TABLE OF CONTROLLERS
- 3. ADAPTOR / CONVERTOR UNITS
- 4. SERVICE & WEB MONITORING TOOL
- CHAPTER06_System_design
- CHAPTER07_Function_setting
- CHAPTER08_External_input_and_output
- CHAPTER09_Notes
- CHAPTER10_Optional_parts
- CHAPTER99
LED105
CODE No.
Setting Mode
LED104
CODE No.
Setting Function
Factory
setting
Remarks
7 0
Electricity meter
No. setting 1
*1
0 0 Setting number x00
l
Set the ones digit and tens digit of the No. of
the electricity meter connected to CN135.
0 1 Setting number x01
▪ ▪ ▪
▪ ▪ ▪
▪ ▪ ▪
9 8 Setting number x98
9 9 Setting number x99
7 1
Electricity meter
No. setting 2
*1
0 0 Setting number 0xx
l
Set the hundreds digit of the No. of the
electricity meter connected to CN135.
0 1 Setting number 1xx
0 2 Setting number 2xx
7 2
Electricity meter
pulse setting 1
*2
0 0 Setting number xx00
l
Set the ones digit and tens digit of the No. of
the electricity meter pulse setting connected to
CN135.
0 1 Setting number xx01
▪ ▪ ▪
▪ ▪ ▪
▪ ▪ ▪
9 8 Setting number xx98
9 9 Setting number xx99
7 3
Electricity meter
pulse setting 2
*2
0 0 Setting number 00xx
l
Set the hundreds digit and thousands digit of
the electricity meter pulse setting connected to
CN135.
0 1 Setting number 01xx
▪ ▪ ▪
▪ ▪ ▪
▪ ▪ ▪
9 8 Setting number 98xx
9 9 Setting number 99xx
9 0 Prohibited
0 0 Prohibited
l
Setting prohibited
0 1 Prohibited
0 2 Prohibited
0 3 Prohibited
0 4 Prohibited
0 5 Prohibited
0 6 Prohibited
0 7 Prohibited
0 8 Prohibited
0 9 Prohibited
1 0 Prohibited
1 1 Prohibited
*1: When electricity meter No. is set to “000” and “201 to 299”, the pulses input to CN135 become ineective.
Available setting number is "001" to "200"
*2: When the electricity meter pulse setting is set to “0000”, the pulses input to CN135 become ineective.
Available setting number is "0001" to "9999"
- (07 - 86) -
FUNCTION
SETTING
FUNCTION
SETTING