Operators Manual

En-19
5-3. Screen setting
In “Submenu” screen, select [Screen] with the [Cursor button
(Up/Down)], and press the [Enter button].
Date and time
Monitor
Screen
Filter sign
R.C. sensor control
Room temp. display
Off
Off
Setting:
Back:
Submenu
[
1/2
]
Mo 10:00 AM
“Screen” screen is displayed.
Automatic
off time
30S
Screen
Brightness
Contrast
Date and time
Filter sign
OK:
Cancel:
Mo 10:00 AM
5-3-1. Automatic off time setting
1
In “Screen” screen, select [Automatic off time] with the
[Cursor button (Left/Right)], and set with the [Cursor
button (Up/Down)].
Automatic
off time
30S
Screen
Brightness
Contrast
Date and time
Filter sign
OK:
Cancel:
Mo 10:00 AM
Configurable values of [Automatic off time] are as follows:
• 30s
• 60s
• Off (No illumination)
Note
When the backlight is turned off by the [Automatic off
time], the first button operation is not effective, and illu-
minates the backlight.
If [Automatic off time] is set to [Off], it is effective from
the first button operation.
2
Other screen setting items can be set continually. To
complete the setting, confirm it by pressing the [Enter
button].
When confirmed, screen returns to the “Submenu” screen.
5-3-2. Brightness setting
1
In “Screen” screen, select [Brightness] with the [Cursor
button (Left/Right)], and set with the [Cursor button (Up/
Down)].
30S
Screen
Automatic
off time
Brightness
Contrast
Date and time
Filter sign
Cancel:
OK:
Mo 10:00 AM
Notes
The set is reected while setting it.•
W• hen the automatic off time setting is set in “Off”,
Brightness setting is not displayed (It is not possible
to set it).
2
Other screen setting items can be set continually. To
complete the setting, confirm it by pressing the [Enter
button].
When confirmed, screen returns to the “Submenu” screen.
5-3-3. Contrast setting
1
In “Screen” screen, select [Contrast] with the [Cursor
button (Left/Right)], and set with the [Cursor button (Up/
Down)].
30S
Screen
Automatic
off time
Brightness
Contrast
Date and time
Filter sign
Cancel:
OK:
Mo 10:00 AM
Note
The set is reected while setting it.
2
Other screen setting items can be set continually. To
complete the setting, confirm it by pressing the [Enter
button].
When confirmed, screen returns to the “Submenu” screen.
5-4. Filter sign setting
Note
This function can be used only if the setting is activated
in the installation. To activate this function, consult
authorized service personnel.
9380221067_OM.indb 19 7/9/2555 8:36:28