Design and Technical Manual

6. SYSTEM DESIGN
FUNCTION SETTING

(3) Press the " " or the " " buttons to select the function number.
Each time the "MIN HEAT" button is pressed, it switehes between the one's place and the
ten's place positions.
(4) Press the "POWERFUL" button to proceed
to the setting number.
(Press the "POWERFUL" button again to
return to the function number selection.)
(5) Press the " " or the " " buttons to
select the setting number.
Each time the "MIN HEAT" button is
pressed, it switehes between the one's
place and the ten's place positions.
(6) Press the "MODE" button once to send the
function mode information.
(7) Press the " /
"
button once to send the
function setting information.
A beeping noise will be heard if the
command is accepted.
*Wrong code: No response
Note: Please push " / " button within 30 seconds
after pushing "MODE" button.
FUNCTION DETAILS

Refer to 13-5. FUNCTION DETAILS
Change digitChange digit
Change digit
Pi Pi
- (06 - 68) -
SYSTEM DESIGN SYSTEM DESIGN