Design and Technical Manual

6. SYSTEM DESIGN
MOUNTING POSITION1-4.
OUTDOOR UNIT

For the air conditioner to operate satisfactorily, install it as outlined in installation manual.
Outdoor unit mounting position
z
A position where satisfies the mounting space described in “3-3 Installation space". ●
A position where the unit can be installed horizontally. ●
A position with enough space for performing pipe work, service and maintenance. ●
Outdoor unit mounting limitation
z
A position that is not exposed to strong or seasonal winds. ●
A position where the blown air does not accumulate. ●
A position where there are no obstructions to the air near to the inlet and outlet. ●
A position not exposed to radiation from other heat sources. ●
A position where the discharge air will not affect animals or plants. ●
A position where the noise and hot air will not disturb the neighbour. ●
A position with strong installation fixings, which can sufficiently bear the product weight. ●
A position that does not transmit noise or vibration. ●
A position where drain water discharge is not a problem. ●
A position where snow does not accumulate. ●
A position not easily affected by electrical noise. ●
A position out of reach of children. ●
A position where there is no danger of the generation, influx or accumulation of flammable ●
gas.
A position that does not have a special environment such as large amounts of oil, vapor or ●
sulfide gas.
- (06 - 08) -
SYSTEM DESIGN SYSTEM DESIGN