Installation Manual

En-9
English
(5) Remove the control box as shown in the fi gure, and then
change the positioning to the opposite side.
(6) Attach the control box to the main unit as shown in the
fi gure.
(7) Attach the bottom panel and secure it with the screws
(4 pieces).
(8) Secure the control box with the screws (4 pieces).
(9) Attach the control box cover and secure it with the
screws (2 places).
(10) Attach the wiring cover and secure it with the screws
(2 places).
Affi x the seals on the main unit (4 places).
To the opposite side
Remove the control
box by lifting up and
out through slots
Control
box
The lead wire
runs here
Control
box
Insert and fi x the control box
using the slots
Control box
Bottom panel
Control box
Control box cover
Secure the wiring cover by
inserting into the slots
Wiring cover
Seal
(Accessory)
Affi x the seal so each hole
(4 places) is covered.
9380120001-06 EN.indd 99380120001-06 EN.indd 9 6/16/2558 BE 8:19 PM6/16/2558 BE 8:19 PM