Installation Manual

En-11
English
4.3.2-B. Fix the unit (For wall installation)
<Horizontal installation>
(1) Secure the hangers (accessories) with the screws
(2 pieces, Ø 4 x 10, accessories). (4 places)
• Install the unit with its top side facing upwards.
<Vertical installation>
(1) Secure the hangers (accessories) with the screws
(2 pieces, Ø 4 x 10, accessories). (4 places)
• Install the unit with the control box facing upwards.
(2) For temporary mounting of the unit, install 2 of the
Ø 4×25 screws in the wall, allowing the space of
5~10mm (3/16~3/8 in.) between the wall and the screw
heads. Then hook the unit over these 2 screws.
(2) For temporary mounting of the unit, install 2 of the
Ø 4×25 screws in the wall, allowing the space of
5~10mm (3/16~3/8 in.) between the wall and the screw
heads. Then hook the unit over these 2 screws.
(3) After checking that the unit is fl at, secure and
mount the branch box with the 8 screws (Ø 4 x 25,
accessories) provided including the tapping screws.
(The unit’s slope must be within ±5° in all directions.)
(3) After checking that the unit is fl at, secure and
mount the branch box with the 8 screws (Ø 4 x 25,
accessories) provided including the tapping screws.
(The unit’s slope must be within ±5° in all directions.)
Top side
Hanger
Screw
Space
between wall
and head of
screw:
5 ~ 10 mm
(3/16 ~ 3/8 in.)
Tapping
screws
469 (18-15/32 in.)
Pitch for securing the tapping
screws
SCREW SCREW
SCREW SCREW
Hanger
Screw
Control box
469 (18-15/32 in.)
SCREW SCREW
SCREW SCREW
Pitch for securing the tapping
screws
Tapping
screws
Space
between wall
and head of
screw:
5 ~ 10 mm
(3/16 ~ 3/8 in.)
9380120001-06 EN.indd 119380120001-06 EN.indd 11 6/16/2558 BE 8:20 PM6/16/2558 BE 8:20 PM