Design and Technical Manual

6. SYSTEM DESIGN
FUNCTION SETTING

3) Pressing the SET TIME < button or the SET TIME > button, to select the function number.
Function number
4) Pressing the SET TEMP. V button or the SET TEMP. Λ button, to select the setting number.
The display ashes during setting number selection.
Ex.) Function number : 30, Setting number : 01
Setting number
5) Pressing the TIMER SET button, conrm the setting.
(The data will be transferred to the indoor unit.)
GOOD
NOT GOOD
When the data was not set up on the indoor ●
unit (-- is displayed.)
Set up the data again according to the ●
procedure in step 3), 4) above.
When the data was normally set up on the indoor
unit
(Flashing display changes to illuminated display.)
FUNCTION DETAILS

Refer to 5-6. FUNCTION DETAILS
- (06 - 73) -
SYSTEM DESIGN SYSTEM DESIGN