User's Manual
Table Of Contents
- SPARC® Enterprise T5140 and T5240 Servers Installation Guide
- Contents
- Figures
- Tables
- Preface
- Preparing for Installation
- Installing the SPARC Enterprise T5140 and T5240 Servers
- Powering On the System
- Updating the Firmware
- Selecting a Boot Device
- Installing the Servers With the Express Rail Rackmounting Kit
- Index
Chapter 2 Installing the SPARC Enterprise T5140 and T5240 Servers 29
7. Pull both slide rail release buttons toward you simultaneously and slide the
server back into the rack (
FIGURE 2-13).
The server should slide smoothly into the rack without binding.
FIGURE 2-13 Rail Mounting Bracket Release Button (Either Server)
8. Verify that the CMA retracted without binding.
9. Adjust the cable straps and CMA as required to secure the cables.
See “Managing Cables With the CMA” on page 34.