User's Manual
Table Of Contents
- SPARC® Enterprise T5140 and T5240 Servers Installation Guide
- Contents
- Figures
- Tables
- Preface
- Preparing for Installation
- Installing the SPARC Enterprise T5140 and T5240 Servers
- Powering On the System
- Updating the Firmware
- Selecting a Boot Device
- Installing the Servers With the Express Rail Rackmounting Kit
- Index
18 SPARC Enterprise T5140 and T5240 Servers Installation Guide • February 2008
FIGURE 2-3 Unlocking the Slide Rail Middle Section (Either Server)
2. Attach a mounting bracket to the right side of the chassis.
a. Position the mounting bracket against the chassis (
FIGURE 2-4). Ensure that
the slide rail lock is at the front and the three keyed openings on the
mounting bracket are aligned with the three locating pins on the side of the
chassis.
Metal lever