Manual

62 SPARC Enterprise T5140 and T5240 Servers Administration Guide • February 2008
7. Exit the format utility.
The volume can now be used in the Solaris OS.
Note – The logical device names might appear differently on your system,
depending on the number and type of add-on disk controllers installed.
▼ To Delete a Hardware RAID Volume
1. Verify which hard drive corresponds with which logical device name and
physical device name.
See “Disk Slot Numbers, Logical Device Names, and Physical Device Names” on
page 53.
2. Determine the name of the RAID volume, type:
In this example, the RAID volume is
c0t1d0.
Note – The logical device names might appear differently on your system,
depending on the number and type of add-on disk controllers installed.
# raidctl
RAID Volume RAID RAID Disk
Volume Type Status Disk Status
------------------------------------------------------
c0t0d0 IM OK c0t0d0 OK
c0t1d0 OK