Manual

Chapter 2 Managing RAS Features and System Firmware 45
▼ To Unconfigure a Device Manually
● At the -> prompt, type:
where the
Device_Identifier is one of the device identifiers from TABLE 2-5
Note – The device identifiers are case sensitive.
▼ To Reconfigure a Device Manually
● At the -> prompt, type:
where the
Device_Identifier is any device identifier from TABLE 2-5.
-> set Device_Identifier component_state=disabled
TABLE 2-5 Device Identifiers and Devices
Device Identifiers Devices
/SYS/MB/CMPcpu_number/Pstrand_number CMP (0-1) CPU strand (0-63)
/SYS/MB/CMPn/RISERn/PCIEslot_number CMP (0-1) Riser (0-1) PCIe
slot (0-5)
/SYS/MB/CMPn/RISERn/XAUIcard_number CMP (0-1) Riser (0-1) XAUI
card (0-1)
/SYS/MB/NETnetwork_number Network interfaces (0-3)
/SYS/MB/PCIE PCIe root complex
/SYS/MB/USBnumber USB ports (0-1, located on
rear of chassis)
/SYS/MB/CMPn/L2_BANKnumber CMP (0-1) Bank (0-7)
/SYS/DVD DVD
/SYS/USBBD/USBnumber USB ports (2-3, located on
front of chassis)
/SYS/TTYA DB9 Serial Port
/SYS/MB/CMPn/MRn/BR/branch_number/CHchannel_number/Ddimm_number CMP (0-1) Riser (0-1) Branch
(0-1) Channel (0-1) DIMM
(0-3)
-> set Device_Identifier component_state=enabled