Manual

14 SPARC Enterprise T5140 and T5240 Servers Administration Guide • February 2008
2. Open a terminal session on the connecting device, and type:
For example, for a SPARC Enterprise T5140 or T5240 server connected to port
10000 on a terminal server whose IP address is 192.20.30.10, you would type:
Accessing the System Console Through a Tip
Connection
Use this procedure to access the SPARC Enterprise T5140 or T5240 server system
console by connecting the serial management port (SER MGT) to the serial port of
another system (
FIGURE 1-5).
% ssh IP-address-of-terminal-server port-number
% ssh 192.20.30.10 10000