Instruction Manual

OpenBoot Configuration Variables 55
diag-switch? true, false false If true OpenBoot verbosity is set to
maximum
If false OpenBoot verbosity is set to
minimum
error-reset-recovery boot, sync,
none
boot Command to execute following a system
reset generated by an error.
network-boot-arguments [protocol,]
[key=value, ]
none Arguments to be used by the PROM for
network booting. Defaults to an empty
string. network-boot-arguments can
be used to specify the boot protocol
(RARP/DHCP) to be used and a range
of system knowledge to be used in the
process. For further information, see the
eeprom (1M) man page or your Solaris
Reference Manual.
TABLE 1 OpenBoot Configuration Variables Stored on the System Configuration Card (Continued)
Variable Possible Values Default Value Description