User's Manual

Working with the notebook
Removing the card
Always remove the card according to the rules described below, to
ensure that none of your data is lost.
You can stop the card using the corresponding icon in the task b ar:
► Left click on the icon to safely remove hardware, located in the taskbar.
► Select the card you want to stop
and remove.
► Press the "Enter" key.

Wait fo r the dialog box which tel
ls you th at it is now safe to remove the card.
1
2
► If the eject button is lowered, you must
first cause the eject button to release
from the notebook casing. To do this,
press the eject button until it pops out.
Press the eject button (1) so that the card
protrudes a little from the notebook.
► Pull the card out of the slot (
2).
► Insert the card placeho
lder into the
slot guide.
► Carefully slide the placeholder for the
cardasfarasitwillgointotheslot.
Do not use excessive force.
Loudspeakers and microphones
MicrophoneLoudspeakersBasslouds peaker(subwoo fer)Volume con trol
Information on the exact position of the speakers and microphone can be
found in "
Ports and contr ols", Page 9.
Please refer to chapter "
Key co mbinations", Page 45 for information on setting th e v olume
and also enabling/disabling th e loudspeakers using key combinations.
If yo u attach an external microphone, the built-in microphone is disabled.
When you connect headphones or external speakers, the bu ilt-in speakers are disabled.
Information on connecting headphones and a microphone can be found
in "
Connecting external de vices", Page 83.
Fujitsu Technology Solutions 67