User manual
Table Of Contents
- FUJITSU Tablet STYLISTIC V727
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Status indicators
- Switching on the Tablet PC
- Switching the Tablet PC off
- Handwriting recognition
- Touch screen
- Select display orientation (portrait or landscape orientation)
- Using fingers
- Using the stylus pen
- Tablet buttons
- Camera
- Rechargeable battery
- Using the power-management features
- Memory cards
- SIM card (configuration dependent)
- Wireless LAN€/ Bluetooth€/ LTE radio components (configuration dependent)
- Ethernet and LAN (optional, only with cradle or adapter cable)
- GPS
- Accessories for your Tablet PC (optional)
- Security functions
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Troubleshooting and tips
- Help if problems occur
- The Tablet PC's date or time is incorrect
- Battery charging indicator not lit
- The Tablet PC's touchscreen remains dark
- The display on the Tablet PC's touchscreen is difficult to read.
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the pen movements
- Pen input not working
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The printer does not print
- The wireless connection to a network does not work
- The battery discharges too quickly
- SmartCard reader is not recognised.
- SmartCard PIN forgotten
- SmartCard lost
- Acoustic warnings
- Error messages on the screen
- Restoring the system under Windows€10
- Technical data
- Manufacturer’s notes
- Index
Security functions
Configuring password protection in BIOS Setup Utility
Before using the various options for password protection in the BIOS Set up utility
to increase data security, please observe the following:
Make a note of the passwords and keep them in a safe place. If you forget your
supervisor password you will not be able to access your Tablet PC. Deletion of the
password is not covered by your warranty and a charge will be made for assistance.
Password protection
Your password can be up to
32 characters long and can contain letters, numbers and
special characters. A di
stinction is made between upper and lower case.
When using special char
acters, please remember that they depend on the
country version of the k
eyboard being used.
Protecting BIOS Setup Utility (supervisor and user password)
If you have opened these operating instructions on the screen, we
recommend that you print them out. You cannot call the instructions onto
the screen while you are setting up the password.
BIOSSetupUtility
The supervisor password and the user password both prevent unauthorised use of the BIOS Setup
Utility. With the aid of the supervisor password you can access all of the functions of the BI OS
Setup Utility , while the user password will only give you access to some of the functions. You
can only set up a user password if a supervisor password has already been assigned.
Please refer to section "Settings in BIOS Setup Utility", Page 64 for a description
of how to call up and operate the BIOS-Setup-Utility.
Setting supervisor and user password
► Start the BI
OS Setup U tility and go to the Security menu.
► Select the Set Supervisor Password field and press the Enter key.
With Enter
new Password: you are asked to enter a password.
► Enter the password and press the Enter key.
Confirm ne
w Password requires you to confirm the password.
► Enter the password again and press the Enter key.
Changes
have been saved is a confirmation that the new password has been saved.
► To set the user password, select Set User Password and proceed exactly as
when configuring the supervisor password.
If you d
o not want to change any other settings, you can exit BIOS Setup Utility.
►IntheExi t menu, select the option Save Changes & E xit.
► Selec
t Yes and press the Enter key.
PasswordSupervisor passwordUserpassword
The Tablet PC is rebooted and the new password is effective. It will now be necessary to
first enter your supervisor or user password in order to open the BIOS Setu p Utility. Please
note that the user password only provides access to a few of the BIOS settings.
52 Fujitsu