Operation Manual

Connecting external devices
Connecting external devices
Under all circumstance s, please observe the safety notes provided in the
"
Important notes", Page 12 chapter before co nnecting o r disconnecting
any devices to or from your Tablet PC.
Always read the documentation s upplied with the device you wish to connect.
Never connect o r disconnect cables during a thunderstorm.
Never pull at a cable when disconnecting it. Always gra sp the plug.
With so me devices, such as USB devices, it is not necessary to switch off
the Tablet PC and the device before connecting/disconnecting. For more
information about whether or not devices need to b e switched off, please refer
to the documentation supplied with the extern al device.
Some of the external devices require special drivers (see the operating
system and external device documenta tion).
Connecting an external monitor
HDMI port (multifunctional cradle only)
HDMIport
The HDMI port of the multifunctional cradle can be used to connect an external
amplifier, LCD TV or a plasma TV with an HDMI port.
► Connect the data cable to the
external device.
► Connect the data cable to the HDMI port
of the multifunctional crad le.
Some LCD televisions have only two loudspeakers/loudsp eaker ports and
therefore cannot reproduce Dolby Digital. To play back HDMI sound, you
must change the HDMI sound se tting s accordingly.
You c an find the settings under Control Panel - Hardware and Sound. Disable the
settings for Dolby Digital to e nable playback of HDMI sound.
62 Fujitsu