Operation Manual

Working with the Tablet PC
Wireless LAN / Bluetooth / LTE (optional)
/ NFC radio components
The installation of radio components not approved by Fujitsu will invalidate
the certifications issued for this device.
Switching the wireless components on and off
The radio components are switched on and off via the corresponding functions of the operating system.
► To switch radio compon ents on and off individually, select Settings – Change
PC settings – Network – Airplane mode.
Setting up WLAN access
• Requirement: A W LAN must be available and you must have the
corresponding access information.
Information on configuring the WLAN access can be found in the
documentation for your operating system.
NFC (Near Field Communication)
Your Tablet PC is equipped with an integra ted NFC chip. Near field communicat ion is used
for contact-free data exchange by radio ove r short distances (a few c entimetres).
Access via L
TE (optional)
If you ordered an integrated LTE module with your syste m, you can enjoy optimum
reception and maximum energy efficiency without aw kwa rd cables or antennas. Th e
optional LTE module is ready for use straight away.
You will find information on establishing the connection with the LT E network in the
documentation for the hardw are y ou plan to use.
Your device can connect with the Internet via LT E . To do this, use on e of
the following types of connection:
• Integrated LTE module (depending on your model variant)
•aUSBd
ongle (a USB stick with your mobile phone provider’s SIM card)
• a mobile end-device (e.g. mobile phone with Bluetooth or ca ble connection)
Fujitsu 39