Operation Manual

First-time setup of your device
Selecting a location
SelectingalocationDeviceMains adapter
Select a suitable location for the device before setting it up. Follow
the instructions below when doing so:
• Never place the device or the mains adapter on a heat-sensitive surface.
The surface could be damaged as a result.
• Never place the device on a soft surface (e. g. carpeting, upholstered furniture,
bed). This can result in damage caused by overheating.
• The und erside of the de vice heats up during normal operation. Prolonged contact
with the skin may become unpleasant or even result in burns.
• Place the device on a stable, flat, non-slippery surface. Please note that the
rubber feet of the device may mark certain types of delicate surfaces.
• Keep other objects at least 100 mm / 3.97" away from the d evice and
its mains adapter to ensure adequate ventilation.
• Do not expose the device to extreme environmental conditions. Protect
the device against dust, moisture and heat.
Mains adapter connecting
Preparingforo perationMainsadapter
Observe the safet
y notes in the enclosed "Safety/Re gulations" man ual.
The supplied pow
er cable conforms to the requirements of the country in
which you purcha
sed your device. Make sure that the power cable is approved
for use in the co
untry in whic h you intend to use i t.
3
1
2
► Open the cover of the charg ing port as shown.
► Connect the charging connector of the power supply cable (1) to the Tablet PC.
► Connect the connector of the power s upply cable (2) to the m ains adapter.
► Plug the mains adapter into the mains socket (3).
18 Fujitsu