Fujitsu Stylistic® ST4000 Series TABLET DOCK USER’S GUIDE Tablet Dock(1-2) 1 24/3/03, 10:35 AM
F u j i t s u S t y l i s t i c S T 4 0 0 0 S e r i e s Ta b l e t D o ck Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Ltd., and Stylistic is a registered trademark of Fujitsu Ltd. Microsoft and Windows are registered trademarks of the Microsoft Corporation. All other trademarks mentioned herein are the property of their respective owners.
Ta bl e t D o c k U s e r ’s G u i d e Fujitsu Stylistic ST4000 Series Tablet Dock This guide contains information on using your Tablet Dock. You should read this section before using the dock, even if you are familiar with other computer docking devices.
F u j i t s u S t y l i s t i c S T 4 0 0 0 S e r i e s Ta b l e t D o ck IDENTIFYING THE COMPONENTS Before using your Tablet Dock, you should familiarize yourself with its various features. Positioning Guide Side Latch (both sides) Back Latch Interface Connector Lock Release Button Back Latch Lock Handle Positioning Guide Platform Kensington® Lock Slot Front of base (Do not use as a carrying handle). CD-ROM or Combo DVD/ CD-RW Drive Figure 1.
Ta bl e t D o c k U s e r ’s G u i d e DOCKING YOUR SYSTEM Microsoft® Windows® uses “plug- and-play” technology to automatically load the files necessary to operate your Tablet Dock and any attached devices. Microsoft® Windows® uses “plug-and-play” technology to automatically load the files necessary to operate your Tablet Dock and any attached devices. The front portion of the base should not be used as a handle.
F u j i t s u S t y l i s t i c S T 4 0 0 0 S e r i e s Ta b l e t D o ck CHANGING SYSTEM ORIENTATION Microsoft® Windows® uses “plug-and-play” technology to automatically load the files necessary to operate your Tablet Dock and any attached devices. Figure 6. Changing Display from Portrait to Landscape Mode Figure 4. Portrait Orientation Figure 7. Changing Display from Landscape to Portrait Mode Figure 5.
Ta bl e t D o c k U s e r ’s G u i d e CONNECTING DEVICES Once your system is installed in the Tablet Dock, you are ready to attach external devices to the dock. To Attach an External VGA Monitor This option allows you to use an external monitor with your system. The only requirement is that the external device (monitor, projector) is a VGA device. Consult the instructions that come with the device. 1.
F u j i t s u S t y l i s t i c S T 4 0 0 0 S e r i e s Ta b l e t D o ck • • CD-ROM drive All of the software you need to run the CDROM drive is already installed on the ST4000 series system. The drive will work as soon as the system is docked and powered up. Combo DVD/CD-RW drive Packaged with the Tablet Dock is a CD that contains the applications required to run the DVD and CD/RW features. The combo drive will only act as a CD-ROM drive until you install the additional software.
Ta bl e t D o c k U s e r ’s G u i d e Do not operate your media drive unless your system is sitting on a relatively flat surface. Using the drive when the system is not level may damage the drive or prevent proper operation. LOADING MEDIA (Refer to Figure 8 for the following steps) To load a disc into your media player drive, follow these steps: 1. Push and release the eject button on the front of the drive to open the holder tray. The tray will come out of the system a short distance. 2.
F u j i t s u S t y l i s t i c S T 4 0 0 0 S e r i e s Ta b l e t D o ck SAFETY PRECAUTIONS • Never move the Tablet Dock with the system docked unless it is fully locked. If the system were to undock accidentally, it could drop and be damaged. • Never power-off or remove the computer from the Tablet PC while the system is reading or writing to a floppy or hard drive. This could result in data loss. • Always wait at least 5 seconds before restarting the Tablet PC after turning it off.
