Operation Manual

Memory expansion
Your Tablet PC has two DIMM slots. 256 MB, 512 MB and 1 GB modules are available so that you
can install up to 2 GB of memory in your system.
A DIMM replacement should only be carried out at a suitable workplace. You must
statically discharge yourself (e.g. by touching an earthed object). The equipment and tools
you use must be free of static charges. Avoid touching connector pins, conductors or other
circuit components on the Tablet PC. Electrostatic discharge caused by doing so can
damage sensitive components.
!
Removing and installing memory modules
Please note the information provided in "Notes on installing and removing boards and
components
" section in "Important notes".
!
The notebook must be switched off when installing/removing memory modules, and must
not be in Suspend mode.
Only use the manufacturer’s memory expansions that have been approved for your
device.
Never use force when installing or removing memory modules.
Make sure that foreign objects do not fall into the memory expansion compartment.
Removing a memory module
► Switch the Tablet PC off (see "Switching off the Tablet PC"). Do not attempt to install or remove
a DIMM module when the system is in Suspend mode or running.
► Pull the power plug out of the mains outlet.
► Remove the battery (see "
Removing and installing the battery").
A26391-K222-Z121-1-7619, edition 2 43