Operation Manual

Using the Tablet PC

Deleting hand-written pen entries

► Press the back of the rocker button (facing toward the pen grip) and move the pen tip over the

characters to be deleted.

Moving the cursor

► Hold the pen tip within 1/8 inch (3 -5 mm) of the screen and move the pen.

Calibrating the pen

Before using the pen for the first time, you should calibrate it so that the cursor follows the

movements of the pen as accurately as possible. You should also always repeat the calibration if the

co-ordination between the pen and cursor movement deteriorates.

Windows XP:

To calibrate, run the Tablet and Pen Settings function in the Control Panel.

Windows Vista:

To calibrate, run the Mobile PC - Tablet PC Settings function in the Control Panel.

Attaching the pen retention cord

To avoid dropping or losing your pen, you should attach it to your system using the retention cord,

which is available as an accessory.

1 = Anchorage for pen retention cord

2 = Loop

3 = Loop

A26391-K222-Z121-1-7619, edition 2 31