Operation Manual

Using the Tablet PC
This chapter describes the basics for operating your Tablet PC.
!
Please refer to the notes in "
Important notes".
System modes
Before you begin using the Tablet PC, review the different system modes that the system provides.
Your system may be configured to enter some of these modes automatically after a period of
inactivity to conserve battery power.
ON mode
The system is running. The screen is on.
Idle mode
Some system functions are regulated or turned off to conserve power. The system returns to ON
mode when pen activity or other input is detected.
Suspend mode
Suspend-to-RAM mode
All system functions are turned off to conserve power. Power to memory is on, maintaining data in
programs that were running before system operation was suspended.
The system does not respond to the pen or other input when in Suspend-to-RAM mode.
Hibernate mode
All system functions are turned off to conserve power. Active data in programs that were running
before suspending system operation is stored on the hard disk drive.
The system does not respond to the pen or other input.
A26391-K222-Z121-1-7619, edition 2 17