User manual
Table Of Contents
- FUJITSU Tablet STYLISTIC R726
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Status indicators
- Switching on the Tablet PC
- Switching the Tablet PC off
- Handwriting recognition
- Touch screen
- Select display orientation (portrait or landscape orientation)
- Using fingers
- Using the pen (optional, depending on configuration)
- Volume rocker
- Camera
- Rechargeable battery
- Using the power-management features
- Memory cards
- SIM card
- Wireless LAN€/ Bluetooth€/ UMTS€/ LTE / NFC wireless components (depending on configuration)
- Ethernet and LAN (only with cradle)
- GPS
- Accessories for your Tablet PC (optional)
- Security functions
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Troubleshooting and tips
- Executing a reset
- Help if problems occur
- The Tablet PC's date or time is incorrect
- Battery charging indicator not lit
- The Tablet PC's touchscreen remains dark
- The display on the Tablet PC's touchscreen is difficult to read.
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the pen movements
- Pen input not working
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The printer does not print
- The wireless connection to a network does not work
- The battery discharges too quickly
- Acoustic warnings
- Error messages on the screen
- Restoring the system under Windows€10
- Technical data
- Manufacturer’s notes
- Index
Troubleshooting and tips
Error message/cause Resolution
Operating system not found
► Ch eck in the BIOS Setup whe ther y
our hard
disk has been set correctly.
► Make sure that the operating system is
installed on the corresponding drive.
Press < F1> to resume, <F2> to SETUP
This error message appears if an error occurs
during the self-test before starting the operating
system.
► Pre ss the volume up button to s tart the
BIOS Setup.
or
► If you use an external keyboard, press
the
F1
or
F2
key on the keyboard.
Real time clock error
► Co ntact your sales outlet or our customer
service centre.
nnnnK Shadow RAM failed at offset: xx xx Failing
Bits: zzzz
► Co ntact your sales outlet or our customer
service centre.
System battery is dead - R eplace and run SETUP
► Co ntact your sales outlet or our customer
service centre.
System cache error - Cache disabled
► Co ntact your sales outlet or our customer
service centre.
System timer error
► Co ntact your sales outlet or our customer
service centre.
Restoring the system under Windows 10
If necessary
, you can reset your system to the original state of the hard disk.
► In Windows St
art screen or Desktop, sweep with a finger from the right
edge to open
the Action Centre.
► Select All setting s.
► Select Upd
ate & security.
► Select Recovery.
► Select ac
cording to your re quirements from the options given.
76 Fujitsu