User manual
Table Of Contents
- FUJITSU Tablet STYLISTIC R726
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Status indicators
- Switching on the Tablet PC
- Switching the Tablet PC off
- Handwriting recognition
- Touch screen
- Select display orientation (portrait or landscape orientation)
- Using fingers
- Using the pen (optional, depending on configuration)
- Volume rocker
- Camera
- Rechargeable battery
- Using the power-management features
- Memory cards
- SIM card
- Wireless LAN€/ Bluetooth€/ UMTS€/ LTE / NFC wireless components (depending on configuration)
- Ethernet and LAN (only with cradle)
- GPS
- Accessories for your Tablet PC (optional)
- Security functions
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Troubleshooting and tips
- Executing a reset
- Help if problems occur
- The Tablet PC's date or time is incorrect
- Battery charging indicator not lit
- The Tablet PC's touchscreen remains dark
- The display on the Tablet PC's touchscreen is difficult to read.
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the pen movements
- Pen input not working
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The printer does not print
- The wireless connection to a network does not work
- The battery discharges too quickly
- Acoustic warnings
- Error messages on the screen
- Restoring the system under Windows€10
- Technical data
- Manufacturer’s notes
- Index
Troubleshooting and tips
Acoustic warnings
Acousticerror messagesErrors
Cause
Troubleshooting
A beep sounds every few seconds.
The battery is almost flat.
► Charge the battery.
Error messages on the screen
Errormessages onthesc
reen
Errormessage:
This section de scribes the error messages generated by the BIOS Setup. Error messages displayed
by the operating system or programmes are described in the relevan t documentation.
If the error message appears repeatedly, despite troubleshooting measures, please
contact the place of purchase or our customer service centre.
Error message/cause Resolution
CMOS battery bad
If the error message occurs repeate dly, the
buffer battery in the Tablet PC is flat.
► C ontact your sales outlet or our customer
service centre.
System CMOS checksum bad - default config uratio n
used
The system configuration information is
incorrect.
► Sw itch off the Tablet PC.
► Sw itch on the Tablet PC.
► In the BIOS Setup, select the Exit me nu.
► Se lect th e entry Load Setup Defaults.
► Select OK and press the Enter key.
Extended memo r y failed at offset: xxxx Failing Bits:
zzzz zzzz
When testing the extended memory an error has
resulted at the address xxxx.
► C ontact your sales outlet or our customer
service centre.
Failure Fixed Disk n
The settings of the hard disk drive are incorrect.
► Start the BIOS Setup (Primary Master
submenu) and select the correct sett ings.
Keyboard controller error
► Sw itch off your Tablet PC using the O N/O F F
button.
► Wait 3 - 5
seconds and switch on the Tablet
PC again
.
Keybo
ard error
If you are using a n external keyboard:
► C heck the connection and rebo ot the Tablet
PC.
nn St uck key
► M ake sure that no key is pressed.
Operating system not found
► C heck in the BIOS Setup whether your hard
disk has been set co rrectly.
► Make sure that the operating system is
installed on the corresponding drive.
Fujitsu 75