Operation Manual

Troubleshooting and tips
Executing a reset
If the device no longer responds to your inputs, select one of the following option s:
Forced shut do wn
► Press and hold the ON/OF F switch for at least 4 seconds.

The device will shut down. You can then restart it.
Carry out a batte ry reset
► Shut dow n the device.
If the device does not respond, you may have to force the shutdo wn,
as described in the previous section.
► Disconnect the mains adapter from the device.
► Press the increase volume button and the s hortcu t button at the same time.

The device performs a reset, comparable to removing the battery. You can then restart it.
Help if problems occur
Should you encounter a problem with your computer that you cannot resolve yourself:
► Note the ID number of your device. The ID number is found on the type rating
plate on the back or underside of the casing.
► For further clarification of the problem, contact the Service Desk for your country (see the
Service Desk list or visit the Internet at
"
http://support.ts.fujitsu.com/co ntact/servicedesk/ServiceDes kNumbe r_Int.asp"). When you
do this, p lease have ready the ID number and serial numb er of your system.
The Tablet PC’s date or time is incorrect
Summert
ime
Time, da
ylightsavings
Time not
correct
Time not
correct
Incorre
ctdate/time
Dateisi
ncorrect
Bufferb
attery,load
Cause Troubleshooting
Time and date are incorrect. ► With the BIOS-Setup-Utility, you can set the
date and time in the main menu.
Date and time are still set incorrectly after
switchingontheTabletPC.
► Please contact your sales outlet or our
Hotline/Service Desk.
Fujitsu 79