Operation Manual

Security functions
SmartCard read er (optional)
Securityfunctions,Securityfunctions
SmartCards are not supplied as standard equipment. You can use all SmartCards that comply with
the ISO sta ndard 7816-1, -2 or -3. These SmartCards are available from various manufacturers.
With the appropriate software y ou can use your SmartCard as an alternative to password protection,
but also as a digital signature, for encrypting your e-mails or for home banking.
We recommend that you always use two Sm artCa rds. Always ke ep one of the SmartCards
in a safe place if you are carrying the other SmartCard with you.
In order to be able to take advantage of all the security features of your Tablet
PC, you will need a CardOS SmartCard from F ujitsu.
The SmartCard can only be used with a PIN, offering maximum protection even if
you lose the SmartCard. In order to maximise your security, the CardO S SmartCard
is disabled if three incorrect attem p ts are made to enter the P IN.
When you use the CardOS S martCard for the first time, you will either need to enter the
preset PIN "12345678" or the PIN given to yo u by your systems administrator.
Inserting the SmartCard
Do not use force when inserting and removing the SmartCard.
Make sure that foreign objects do not fall into the SmartCard reader.
1
► Push the SmartCard into the SmartCard reader with the c hip facing the rear of the Tablet PC.
Trus
ted Platform Module (TPM) (device-dependent)
TPMTrustedP latformModule
To use the TPM, you must activate the T PM in the BIOS Setup before the software
is insta lled. The condition for this is that you have assigned at least the supervisor
password (see "
Secur ity functions", Page 61).
Fujitsu 67