Operation Manual

Security functions
Removing passwords
To remove a password (without setting a new password) perf orm the following steps:
PasswordSupervisorpasswordUserpassword
► Start the BIOS Setu p Utility and go to the Security menu.
► Highlight the Set Supervisor Password or Set User Password field and pre ss the Enter key.

Yo u will be requ ested to enter the current password by the Enter Current Password prompt.
Yo u will be requested to enter a new password by the Enter New Password prompt.
► Press the Enter key tw ice.
► In the Exit menu, select the option Save Changes & Exit.
► Select Yes and press the Enter key.

The Tablet PC is rebooted a nd the password is cancelled.
Removing the s upervisor password simultaneously deactivates the user password.
Password protectio
n for booting of the operating system
With the supervisor password you have set in the BIOS Setup Utility (see
section "
Setting supervisor and user password", Page 64), you can also
prevent starting of the operating system.
Operating system
Activating system protection
► Start the BIOS Setu p Utility and go to the Security menu.
Operatingsystem
► Select the PasswordonBootoption and press the Enter key.
► Select the desired option (First Boot or Every Boot) and press Enter
► Select the Save Changes & Exit option under Exit.

The Tablet PC reboots. You will be prompted to enter your password (th e supervisor password).
Deactivating system protection
► Start the BIOS Setu p Utility and go to the Security menu.
Operatingsystem
► Select the PasswordonBootoption and press the Enter key.
► Select the Disabled option and press the Enter key.

If you do not want to change any other settings, you can exit BIOS S etu p Utility.
► Select the Save Changes & Exit option under Exit.

The Tablet PC reboots. The system is no longer password-protected.
Password protection for the hard disk
Passw
ordprotection:
The har
d disk password prevents unauthorised access to the hard disk drives
and is c
hecked internally each time the system is booted . The prerequisite for
this is
that you have assigned at least the supervisor p assword.
Fujitsu 65