Operation Manual

First-time setup of your device
Selecting a location
SelectingalocationDeviceMains adapter
Select a suitable location for the device before setting it up. Follow
the instructions below when doing so:
• Never place the device or the mains adapter on a heat-sensitive surface.
The s urface could be damaged as a resu lt.
• Never place the device on a soft surface (e.g. carpeting, upholstered furniture,
bed). This can result in da mage caused by overheating.
• The underside of the device heats u p during normal operation. Prolonged contact
with the skin may become unpleasant or even result in burns.
• Place the device on a s table, flat, non-slippery surface. Please note t hat the
rubber feet of the device may mark certain types of delicate surfaces.
• Keep other objects at least 100 mm / 3.97" away from the device and
its mains adapter to en sure adequate ventilation.
• Do not expose the device to extreme environmental conditions. Protect
the device against dust, moisture and heat.
Mains adapter connecting
Preparingforo perationMainsadapter
Observe the safet
y notes in the enclosed "Safety/Regulations" manual.
The supplied pow
er cable confo rms to the requirements of the co untry in
which you purcha
sed your device. Make sure that the power cable is approved
for use in the co
untry in which you intend to use it.
3
1
2
► Con nect the power cable (1) to the
mains adapter.
► Plug the mains cable (2) into a mains outlet.
► Con nect the mains adapter cable (3) to
the DC jack (DC IN) of the device.
Fujitsu 17