Instruction Manual

Troubleshooting and tips
Stylus input not working
Cause
Troubleshooting
Incorrect driver installed.
► If your device is one which can only be
operated using the stylus, install th e driver
for th e standard model.
or
► If yo ur device is one which can be
operated using the stylus and by finger,
install the driver for the "Dual Digitizer"
model.
The Tablet PC does not start after switch on
TabletPC
Cause Troub leshooting
The battery is dead.
► Ch arge the battery.
or
► Co nnect the AC adapter to the Tablet
PC.
The A C adapt er is not connected properly. ► Ch eck whether the AC ad apter is properly
connected to the Tablet PC.
► Switch the Tab l
et PC on.
The Tablet PC stops working
TabletPCEnding
Cause Troub leshooting
The Tablet PC is in energy saving mode.
► End energy saving mode.
An applicat ion program has caused the
malfunction.
► Close the application program or restart
the Tablet PC (by restarting the operating
system or switching the device off and back
on again).
The battery is dead.
► Ch arge the battery.
or
► Co nnect the AC adapter to the Tablet
PC.
88 Fujitsu