Instruction Manual

Working with the Tablet PC
Further information on WLAN and Bluetooth
For further information about WLAN or Bluetooth, please refer to the
appendix of this Operating Manual.
For W LAN specification s, see chapter "
WLAN specifications", Page 94.
Access via UMTS
If you ordered an integrat
ed UMTS module with your system, you can enjoy optimum
reception and maximum en
ergy efficiency without awkward cables or antennas. The
optional UMTS module is r
eady for use im m ediately.
You will find informatio
n on establishing the connection with the UMTS network
in the documentation fo
r the hardw are used.
Your device can connec
t to the Internet via UMT S. To do th is, use one of
the following types o
f connection:
• Integrated UMTS mod
ule (availability dependent on your confi guration)
• USB dongle (a USB stick containing a SIM card from yo ur cellular phone network provider)
• A mobile end-devic
e (e.g. cellular phone with Bluetooth or cable connection)
Access via Wireless WAN
You can purchase the accessories for Wire less WAN reception from your Fu jitsu dealer.
If you have orde red a Wireless WAN module, your device will already
be prepared when you receive it.
You will find informa tion on establishing the connection with the Wireless WAN
network in the documentation for the hardware yo u plan to use.
Access via 4G
You can orde
r the accessories f or 4G reception from your Fujitsu dealer.
If you have
ordered an integrated 4G module with y our system, the 4G
module is r
eady for use straight away.
You can fin
d information on establishing the connection with the 4G n etwork
in the doc
umentation for the hardware used.
NFC (Near Field Communication, optional)
Your Tablet PC can be equipped with an optional b uilt-in NF C chip. Near Field Communication is
used for contactless exchange of data via radio over short distances (a few centimeters).
44 Fujitsu