Instruction Manual

Important notes
Additional safety notes for devices with
wireless components
Wirelesscom ponentsWirelessLANBluetooth,Safetynotes
If a wireless c omponent (Wireless LAN, Bluetooth, 4G) is integrated in your Tablet PC, y ou must
be sure to observe the following safety p recautions when using your Tablet PC:
• Switch off the wireless components when you are in an aircra ft or driving in a car.
• Switch off the wireless components when you are in a hospital, a n operating
room or near a medical electronics system. The transmitted radio waves
can impair the operation of medical devices.
• Switch off the wireless co mponents, when you let the device get near flammable
gases or into hazardous environments (e.g. gas station, paint stores), as the
transmitted radio waves can c ause an explosion or a fire.
For further information on how to switch the wireless components on and off, refer
to section "
Switching the wireless comp onents on a nd off", Page 43.
Protecting the display screen
Do not pour liquid
s on the system or wash it with a heavily soake d cloth. Do not place
itemsonthetopo
f the monitor in order to prevent it from being damaged.
During normal u
se of the device, small particles from the environment
can become embe
dded in the stylus tip and scratch the screen. The
warranty doe s
not cover a scratched screen.
Energy savin
g
NotesEnergyPowersavin
g
If you will not be using your Tablet PC, switch it off. Switch off any connected external devices when
they are not in use. If you use the energy-saving functions, the Tablet PC uses less power. If you do
this, you will be a ble to w ork longer with the Tablet PC before having to recharge the battery.
The energy efficiency is increased and en vironmental pollution is red uced.
You save money a nd help protect th e environment.
Energy saving under Windows
► Make use of the available energy-saving functions as described in chapter
"
Using the energy saving functions", Page 39.
Fujitsu 15