Instruction Manual

Appendix
Installing the Software after the Recovery Image is Restored
Auto-installation support for essential access software
from hidden partition
The below listed steps are applicable only in cases in which the recovery image restore
and hidden partition contents have not been wiped out.
1. After the recovery image is restore d, launch the desktop icon “Fujitsu Software Auto Installer”.
2. Double-click on “Fujitsu Software Auto Installer” deskto p icon.
3. Click Yes on User Account Control Dialog box. This will take som e time to
process the software packages. A message will be displayed during this time,
“Please wait while the content is being processed”.
4. If EULA is displayed for Fujitsu Software Auto Installer, accept the EULA, otherwise continue.
5. Then Fujitsu Software Auto Installer user interface will be launched providing ability
to auto-ins tall the essential access s oftware on the system.
6. It is recommended that you install all the software in the listed order. You can
Select Al l, to install the softw are in th e order l isted.
7. Click Install to start the installation.
8. After installing all the selected drivers, Installation Results window will be displayed. Click OK .
9. “You must restart the system for the settings to take effect. Do you wish to
reboot now?” message appears. Select Ye s.
10. The system will now reboot.
11. You can now connect to the internet and download FSDM (Fujitsu Software Dow nload
Manager) from the support site and download all the software applicable to the
model and OS using FSDM if they are not downloa ded yet.
Fujitsu 119